汽车内饰皮革阻燃剂Automobile interior leather flame-retardant

汽车内饰薄膜阻燃剂,汽车内饰皮革阻燃剂…

Automotive interior film flame-retardant, automobile interior…

分类:

描述

汽车内饰皮革阻燃剂Automobile interior leather flame-retardant

本产品为高分子磷系树脂型固体阻燃剂,分子量达到5000以上,在150℃以上可以溶解为液态,与基材充分融合。也可通过常规有机溶剂(乙酸乙酯等)溶解后与基材混合,本产品相溶性好,环保无毒,可过SGS环保测试,且对汽车VOC和雾化测试贡献值为0,随着目前环保的日益严峻,本产品将是汽车内饰材料阻燃剂的不二选择。

This product is a polymer phosphate resin type solid flame retardant, with a molecular weight of more than 5000. It can be dissolved into liquid at more than 150 C and fully fused with the base material. It can also be obtained by conventional organic solvent (ethyl acetate) dissolved and mixed substrate. This product is non-toxic and with good biocompatibility. It can pass SGS environmental test and the test of automotive VOC and atomization contribution value is 0. With the current environmental protection is becoming increasingly serious, this product will be the best choice of flame retardant of automobile interior.

物性指标Physical parameters:

汽车内饰阻燃参数图
用途Purpose:
 

汽车内饰薄膜阻燃剂,汽车内饰皮革阻燃剂,汽车胶水阻燃剂

Automotive interior film flame-retardant, automobile interior leather flame retardant, automobile glue flame retardant

注意事项Attentions:

建议加工前预干燥基材,80℃烘6小时,防止树脂因高温水解而引起颜色变化。

  • 建议中段加入阻燃剂,以尽量排出树脂中的残余水份。
  • 使用时要保证阻燃剂的充分分散,同时保持一定的真空度。
  • 该阻燃剂最适于剪切力强一些的设备,可以使产品具有更好的机械性能和良好的外观。

It is suggested that make pre – drying base materia and 80 ℃ drying for 6 hours before working , to prevent the resin from high temperature hydrolysis and cause color change.

  • It is suggested that the middle part of the flame retardant be added to discharge the residual water in the resin as far as possible.
  • Ensure the full dispersion of the flame retardant at the time of use, while maintaining a certain degree of vacuum.
  • The flame retardant is most suitable for the equipment with strong shear force, which can make the product have better mechanical properties and good appearance.